Satelec Implant Center 2 Bedienungsanleitung Seite 42

N mode:
EWTRON
Footswitch button definition (Fig. 8-1 to 5).
- 1: Ultrasonics control (ON/OFF or progressive).
- 2: Flush/prime.
- 3: Change program (Soft to Boost).
- 4: Irrigation ON/OFF.
- 5: Select active handpiece.
f) Technical characteristics
Manufacturer: SATELEC
Device name: I
MPLANT
Electrical power supply:
- Voltage: 100 VAC to 230 VAC.
- Frequency: 50 Hz/60 Hz.
- Rated power: 250 VA at 230 VAC.
I-S function
URGE
Operation:
Intermittent service: 20 sec. ON / 30 sec. OFF at 2 N.cm
Output characteristics:
I-S micro-motor speed: 100 rpm to 40
URGE
I-S micro-motor torque: max. 6 N.cm
URGE
Irrigation flow rate: 10 to 120 ml/min. (nominal value).
Adjustment in 10 ml/min. steps
Flush/prime flow rate: 120 ml/min.
P function
IEZOTOME
Operation:
Intermittent service: 10 min. ON / 5 min OFF
Output characteristics:
No-load voltage: 250 volts (nominal value without handpiece)
Min. ultrasonic frequency: 28 kHz
Irrigation flow rate: 10 to 120 ml/min. (nominal value)
Adjustment in 10 ml/min. steps (nominal value)
Flush flow rate: 120 ml/min. (nominal value)
N function
EWTRON
Operation:
Intermittent service: 10 min. ON / 5 min. OFF
Output characteristics:
No-load voltage: 150 volts (nominal value without handpiece)
Min. ultrasonic frequency: 28 kHz
Irrigation flow rate: 10 to 40 ml/min. (nominal value)
Adjustment in 1 ml/min. steps (nominal value)
Flush flow rate: 120 ml/min. (nominal value)
Protection
Electrical equipment class: Class 1
Electrical safety class:
C 2
ENTER
000 rpm