Herunterladen Inhalt Inhalt Diese Seite drucken

Tone (Td) Or Pulse (Pd) Dialling; Setting The Day And Time Announcement - AUDIOLINE STUDIO 80 Bedienungsanleitung

Schnurloses digitales dect-telefon mit anrufbeantworter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Note: The batteries must be charged for at least 16 hours before being used for the first time.
Exactly like your car battery, the rechargeable batteries are unavoidably subject to a certain
ageing. However, you can have an influence on this ageing process by "training" the batteries to
a certain extent. In regular use of the phone, if you cyclically charge and fully discharge the
batteries by using the telephone until the
placed on the batteries and they will repay you by giving maximum performance and a long life.
Extended charging and extended discharging on the other hand will both degrade the capacity
and shorten the life of the batteries.
3.6

Tone (TD) or pulse (PD) dialling

This trend-setting feature enables you to use your telephone both on analogue exchanges
(Pulse Dialling/PD) and on digital exchanges (Tone Dialling/TD). The unit is set in the factory to
Tone Dialling (TD). If your telephone does not work on your exchange, you can find out under
Section 9.6 how to set up your telephone for pulse dialling (PD).
3.7

Setting the Day and Time Announcement

You should now set the day and time announcement so that all incoming messages are stored
on the answering machine with the correct day of the week and the correct time of day.
1.
Press and hold the
2.
Now set the required day of the week using the
with
. You will now hear the currently set hour of the day.
3.
Now set the required hour using the
You will now hear the currently set minutes.
4. Now set the required minutes using the
. The complete day and time announcement will be repeated
Notes:
After a power failure, the day and time announcement has to be reset.
If you pause for 10 seconds or more while entering the information, the procedure is aborted and
has to be repeated.
Checking the day and time announcement
To check the day and time announcement, briefly press
- Setting up -
symbol appears in the display, a demand is
button until you hear a day of the week.
and
and
and
buttons and confirm
buttons and confirm with
buttons and confirm with
.
.
45

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis