Making Calls; Dialling Stored Numbers From The Phone Book; Call Duration Display; Switching The Handset On And Off - AUDIOLINE STUDIO 80 Bedienungsanleitung

4.3

Making calls

1. Enter the required telephone number with a maximum of 32 digits using the number pad.
As the display is only capable of showing 12 digits, in the case of longer phone numbers
only the last 12 digits are displayed.
Note: If you have entered a number incorrectly, you can delete the number by repeatedly
/
C
pressing the button. The number is completely deleted by pressing the
long time.
2. Press the call button
Note: You can also get a dialling tone by first pressing the call button
of your required phone number, your telephone will dial the number directly. With this method of
making a call, it is not possible to correct individual digits in the number in the manner described
above.
4.4

Dialling stored numbers from the phone book

After you have stored a few phone numbers, you can call these up very quickly and easily.
1. Press the phone book button
alphabetical order.
2. You can now select all of the stored numbers with the
To choose a phone number directly alphabetically, press the appropriate letter.
3. Now press the call button
dialled.
4.5

Call duration display

The call duration in minutes and seconds is shown in the display during a call. Fifteen seconds
after dialling, the display will switch from showing the number dialled to showing the duration of
the call. The call duration will still be retained in the display for a few seconds after the call has
been ended.
4.6

Switching the handset on and off

You can switch off the handset by pressing and holding the
switched off, no battery power will be used. It will not be possible to receive calls.
Press the button once to switch the handset on again. The display will show the
message BASE 1 and the handset will switch on again after a short time. The handset will switch
itself on automatically as soon as you replace it on the base station.
- Operation -
and the required connection will be made.
. The display will now show the first number stored in
and the telephone number displayed will be automatically
/
C
button for a
. On entering the digits
and buttons.
button. If the handset is
47