Activating/Deactivating Warning Tones; Changing The Pin Code - AUDIOLINE STUDIO 80 Bedienungsanleitung

9.8

Activating/Deactivating warning tones

Here, various warning tones can be activated or deactivated.
Button click
Each time a button is pressed, the handset confirms with a button click. The button click can be
switched on or off.
Warning tone for low battery
If the battery capacity is too low, a warning tone will remind you that you must charge the
handset.
Range warning
If you are too far away from the base station, a warning tone will remind you that you are losing
contact with the base station.
1. Press the menu button
2. Select the HANDSET menu with
3. Select the BEEP function with
4. Select one of the functions KEYTONE, LOW BATTERY or OUT RANGE with
and confirm with
5. Switch the selected warning tone on or off with
6. Now select further menu functions or exit the menu by pressing and holding the
button.
9.9

Changing the PIN code

Some functions of the telephone system are protected against unauthorised use by a PIN code.
The PIN code consists of four numbers. As supplied, the PIN code is set to "0000". To change
the PIN code, proceed as follows:
1. Press the menu button
2. Select the SETUP menu with
3. Select the PIN CODE function with
4. Now enter the current four-digit PIN code using the number pad (factory setting 0 0 0 0)
and confirm with
5. Now enter the new four-digit PIN code using the number pad and confirm with
6. Now enter the new four-digit PIN code once more for confirmation and confirm with
7. Now select further menu functions or exit the menu by pressing and holding the
button.
If the old PIN code is not entered correctly, the process will be aborted.
- Special functions -
/
.
and
and
/
.
/
.
and
/
.
and confirm with
and confirm with
and
and confirm with
and and confirm with
/
.
/
.
/
and confirm with
/
.
/
.
and
.
/
.
/
.
65