Caller Display Clid; The Caller List - AUDIOLINE STUDIO 80 Bedienungsanleitung

6 Caller display (CLID)
In the case of incoming calls, you can see who is calling you by means of the caller display
facility. If this function is available on your telephone, the display will show you the caller's
telephone number when the telephone rings. If the caller has blocked the sending of his number
or if the number cannot be displayed for technical reasons, the messages WITHHELD and
UNAVAILABLE will appear in the display.
If you have stored this number in your phone book, the name will be displayed instead of the
phone number. In addition, one of the three ring tones can be assigned to each phone number
stored in the phone book so that you can tell who is calling you simply from the ring tone.
All calls are stored in a caller list so that you will not miss any calls even in your absence. A total
of 30 phone numbers can be stored in the list. When the list is full, the oldest number is always
deleted from the list. If new numbers are stored in the list during your absence, the
will flash in the display.
Note: Caller display is an optional service from your telephone provider. Your
telephone will show the number in the display if your telephone provider offers this
service. The display of date and time is not transmitted by all telephone service
providers. Please ask your telephone provider for further information. Furthermore,
transmission of the phone number and also the date and time is not possible with
many private exchanges.
6.1

The caller list

To view the phone numbers on the caller list, please proceed as follows:
1. Press the button and the last phone number received will be shown in the display. If the
caller list is empty, the display will show the message EMPTY.
2. Further numbers in the caller list can now be selected by means of the
If there are no more phone numbers available, you will hear a signal tone. Two symbols in
the display will tell you whether the call was taken or not.
=> Missing call in your absence.
=> Received calls.
Notes: Information can be called up using the
- If the phone number is longer than 12 digits, the remaining numbers will be displayed.
- Displays the number when the name of the caller is already stored in the phone book.
- Displays the date and time when this information is transmitted by the caller.
- If no further data are available, the display will show the message ADD?.
- You can return to the list once more by pressing the
3. If you want to call back a number on the caller list directly, simply press the call button
and the number will be dialled immediately.
4. Exit the caller list by holding the
52

- Caller display CLID -

/
button.
button pressed.
and
button.
symbol
buttons.