Keypad Lock; Temporary Tone Dialling; Paging From The Base Station To The Handset - AUDIOLINE STUDIO 80 Bedienungsanleitung

Deleting all redial numbers
To delete all numbers from the redial list, proceed as follows:
/
P
1. Press the
/
C
2. Hold the button pressed until DELETE ALL? appears in the display.
3. Confirm with the menu button
list.
4.11

Keypad lock

If you frequently carry the handset with you, you can lock the keypad so that buttons are not
pressed unintentionally. Incoming calls can be received as normal when the keypad lock is
switched on.
Activating the keypad lock
Press the button on the handset for three seconds. The
display.
Deactivating the keypad lock
To deactivate the keypad lock, press the
Note: The keypad lock can also be activated via the menu.
4.12

Temporary tone dialling

If you can only use your telephone in Pulse Dialling mode, you do not have to forego the facilities
of Tone Dialling (e.g. interrogating an answering machine). You can change temporarily to Tone
Dialling during a call by means of the
of the call.
4.13

Paging from the base station to the handset

If you cannot remember where you have left the handset, press the
station. You will hear the handset audible signals for 30 seconds and thus be able to find it again
easily. You can cancel the audible signals earlier by pressing any button on the handset or the
button on the base station.
button.
/
- Operation -
and the telephone number will be deleted from the redial
button twice.
button. PULSE dialling will be reselected at the end
symbol will appear in the
button on the base
49