Charging The Standard Batteries; Tone (Td) Or Pulse (Pd) Dialling; Setting The Time And Date - AUDIOLINE DECT8049 Bedienungsanleitung

3.5

Charging the standard batteries

The rechargeable batteries for your telephone have a stand-by time of max. 100 hours at
room temperature and a maximum talk time of up to 10 hours.
The current battery capacity is shown in the display.
Full
If the battery capacity is too low, the symbol
warning tones every 60 seconds.
To charge the batteries, place the handset in the base station with the display to the front.
3.6

Tone (TD) or pulse (PD) dialling

This trend-setting feature enables you to use your telephone both on analogue exchanges
(Pulse Dialling/PD) and on digital exchanges (Tone Dialling/TD). The unit is set in the
factory to Tone Dialling (TD). If your telephone does not work on your exchange, you can
find out under Section Fehler! Verweisquelle konnte nicht gefunden werden. how to set
up your telephone for pulse dialling (PD).
3.7

Setting the time and date

Before using the mobile unit, you should set the current time and date.
1. Press the Menu display button.
2. Select Set Time with
3. Confirm the Time setting with OK.
4. Now enter the current time using the number pad.
Examples: Time 7:23 AM => 0723, Time 4:04 PM => 1604
5. Confirm with OK.
6. Select Date with
7. Now enter the current date using the number pad.
Examples: 20th January => 2001, 8th October => 0810
8. Confirm with OK.
9. Now select further menu functions or exit the menu by pressing the
- Setting up -
Half
and and confirm with OK.
and and confirm with OK.
Low
will flash in the display and you will hear
button.
43