Additional Base Stations - AUDIOLINE STUDIO 80 Bedienungsanleitung

10.4

Additional base stations

You can increase the range of the handsets by using several base stations. In order to make use
of this effect, all base stations must be connected to a telephone socket. Depending upon the
application, you can allocate the same telephone number to each base station or you can give
the base stations different numbers. Make sure that the ranges of all base stations overlap. Each
handset must be logging on to each basis station. Please test the range of the handsets before
putting a new base station into operation.
If a handset is logged on to the base station and if the automatic base station selection is
activated (further information in this chapter), the handset is always forwarded automatically to
the nearest base station. Current calls cannot be transferred from one base station to another.
Selecting a base station
/
1. Press the
2. Select the REGISTER menu with
3. Select the SELECT BASE menu with
4. The display will now show all base stations that the handset is already logged on to. The
number of the currently active base station will flash. Select the required base station to
which the handset is to be switched by means of the number pad.
Or change to the AUTO setting with the
handset changes automatically to the nearest base station when the connection to the
current base station becomes too weak.
5. Confirm with the
70
- Multiple handsets -
button on the handset.
/
button.
and and confirm with
and and confirm with
and buttons. With this setting, the
/
.
/
.