Special Functions; Setting The Ring Tone On The Handset (Ring Melodies) - AUDIOLINE STUDIO 80 Bedienungsanleitung

9

Special functions

All further programming functions can be accessed by means of a very user-friendly menu. Here
are a few general instructions to help you find your way around the menu:
Programming is started by means of the
during programming.
You can find the required level using the
This level is opened using the
In turn, you can find the required function using the
/
with the button.
You can go back one level each time by pressing the
Each save procedure will be cancelled automatically if no input is made within 15 seconds.
You can leave programming mode at any time without making any changes by pressing and
holding the button.
You will find a complete overview of the menu in Chapter 9.13.
9.1

Setting the ring tone on the handset (ring melodies)

Your handset can respond with three different ringing tones when a call comes through. If you
are using the telephone system with several handsets, you can set different ring tones for
external and internal calls.
1. Press the menu button
2. Select the HANDSET menu with
3. Select the function EXT MELODY (ring tone for external calls) or INT MELODY (ring tone
for internal calls/with two handsets only) with the
/
.
4. Select the required melody with
5. Now select further menu functions or exit the menu by pressing and holding the
button.
62
- Special functions -
/
button. The
and
/
button.
/
.
and
and and confirm with
symbol comes on in the display
buttons.
and buttons and again confirm
button.
/
and confirm with
and buttons and confirm with
/
.
.