Attaching The Belt Clip; Tone Or Pulse Dialling Method - AUDIOLINE DECT4000R Bedienungsanleitung

The current battery charge status is indicated in the display:
d
Full
When the battery charge level is very low, the "BATTERIE" message
appears in the display.
4.7

Attaching the belt clip

Press the belt clip on the rear side of the
handset at the top until it audibly snaps
into place.
4.8

Tone or Pulse dialling method

This future-oriented feature enables the telephone to be connected and
used on both analogue (pulse dialling) and digital (tone dialling)
connections. The equipment is set to TONE dialling (DTMF) at the
factory. If the telephone does not work on your telephone connection,
refer to Chapter 9.2.2 to learn how to switch the telephone to pulse
dialling.
64
- Starting Up -
c
Half empty
b
Weak
a
Empty