Logging On And Logging Off Handsets; Logging On Studio 80 Handsets; Logging On Other Dect-Gap Telephones To The Base Station; Logging Off Handsets - AUDIOLINE STUDIO 80 Bedienungsanleitung

10.3

Logging on and logging off handsets

10.3.1

Logging on Studio 80 handsets

1. Press and hold the page button
signal tones. Now log on the new handset to the base station within 90 seconds.
/
2. Press the
3. Select the REGISTER menu with
4. Select the REG BASE menu with
5. Now enter the number of the base station (1 - 4) using the number pad. If the handset is
already connected to a base station, the corresponding numbers will flash.
6. Confirm your entry with the
station.
7. After the base station has been found, you must enter the PIN Code for the base station
(factory setting 0 0 0 0).
8. Confirm your entry with the
tone. The handset is now logged on and can be used for external and internal calls.
9. An internal number will now be automatically assigned to the handset. The handset that
has already been logged on has the internal number 1. The second handset to be logged
on is given the internal number 2. These internal numbers are shown in the right of the
display next to the name.
10.3.2

Logging on other DECT-GAP telephones to the base station

In order to log on a DECT-GAP handset, follow the instructions in the other supplier's operating
manual and then press the
0 0 to log on.
10.3.3

Logging off handsets

A handset can only be logged off using another handset that is still logged-on. It is therefore not
possible to carry out the logging-off procedure using the handset that is to be logged off.
/
1. Press the
2. Select the SETUP menu with
3. Select the DEL HANDSET function with
4. Now enter the PIN code of the base station (factory setting 0 0 0 0) and confirm with the
/
button.
5. Now select the number 1 or 2 of the handset to be logged off and confirm with the
button. You can abort the process by pressing the
successful, after a few seconds you will hear a signal tone. The handset is now logged off
and can no longer be used for external and internal calls.
- Multiple handsets -
button on the handset.
/
button. A search will now be carried out for the base
/
button and after a few seconds you will hear a signal
button on the base station for 6 seconds. Use the PIN-Code 0 0
button on the handset.
and
on the base station for 6 seconds until you hear two
and and confirm with
and and confirm with
and confirm with
and and confirm with
/
.
/
.
/
.
/
.
button. If the logging-off is
/
69