The Remote Access Facility; The Pin Code; Listening To Messages Using The Remote Access Facility - AUDIOLINE STUDIO 80 Bedienungsanleitung

8.5

The remote access facility

The remote access facility allows the answering machine to be called up from any telephone in
order to listen to messages and to carry out other functions.
8.5.1

The PIN code

Your answering machine has personal access authorisation so that only you can listen to
incoming messages using the remote access facility. This PIN code is set in the factory to
"0 0 0".
Changing the PIN code
1. Press and hold the
current PIN code will be announced.
2. Use the
confirm with
3. Use the
and confirm with
4. Use the
confirm with
8.5.2

Listening to messages using the remote access facility

1. Call your number and wait until your call is answered.
2. Press the button when you hear your greeting message. You will be requested to enter
the three-digit PIN code.
3. Enter the three-digit PIN code.
4. After the PIN code has been correctly entered, you will hear a message telling you how
many new messages have been recorded and the messages will be played back
immediately.
5. After the messages have been played back, further functions can be carried out using the
remote access facility. For more information, see the following table.
During remote query, you will hear further instructions via the spoken menu control.
The remote query is aborted if a pause of more than one minute is encountered.
6. Replace the receiver when you have finished with the remote access facility.
- Answering machine -
button on the base station for 2 seconds. The first number of the
and buttons to set the first number of your chosen PIN code and
. The second number of the current PIN code will be announced.
and buttons to set the second number of your chosen PIN code
. The third number of the current PIN code will be announced.
and buttons to set the third number of your chosen PIN code and
. The complete PIN code will be repeated at the end of the procedure.
59