Instructions For Disposal; Declaration Of Conformity - Klarstein STEAKREAKTOR 2.0 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für STEAKREAKTOR 2.0:

Bedienungsanleitung (104 Seiten)

Inhaltsverzeichnis

Verfügbare Sprachen

Error Codes

F01, F02, F03, F04, F16 When the following error codes are shown on the display, please contact custo-

F05

Err, Hot

The above illustration (crossed-out wheeled bin) is on the product, meaning that the Eu-

ropean Directive 2002/96/EG applies. These products should not be disposed of with

normal household waste. Inform yourself about the local rules on the separate collection

of electrical and electronic equipment. Please act in accordance with your local regulations

and do not dispose of old electronic products with your household waste. Ensuring proper

compliance in the disposal of your old electronic appliances will help prevent potential

negative consequences for fellow human beings and the environment. Material recycling

helps to reduce the consumption of raw materials.

Manufacturer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.

This product complies with the following European Directives:

Tested to DIN EN 60335-2-9: 2011 + Corrigendum 1: 2012 in conjunction with

DIN EN 60335-1: 2012 + Corrigendum 1 + 2: 2014

mer support: F01, F02, F03, F04, F16.

The code F05 indicates that the heating process to achieve the set cooking tem-

perature could not be completed within 10 minutes. The heating process is abor-

ted. Possible cause: the device is exposed to a strong cooling wind or a very cold

environment, or both. The error may be acknowledged by pressing the knob, and

then the display will be returned to its normal position. Should the error repeated-

ly occur under normal conditions, for example, at room temperature, there may

be a defect. In this case please contact customer support.

If Err and Hot are displayed, the device has overheated in the lower part, whe-

re the control electronics are located. Under normal operations, this area should

not be hotter than 50 ° C. Should overheating nonetheless occur, the device will

switch off. Please allow it to cool before operating again.