Cleaning And Care; Troubleshooting - Klarstein STEAKREAKTOR 2.0 Bedienungsanleitung

The cleaning of the unit may only take place when the device is fully cooled and the safety plug has been un-
plugged from the socket, and the device is therefore completely disconnected from the mains.
First remove the drip tray and then the grill. The grill should be completely sprayed with an appropriate cleaner.
Pay attention to metal compatibility when choosing a cleaner. Let the cleaning agent act, and if the grill insert
is very dirty spray several times. After a sufficient reaction time, thoroughly rinse the insert with the aid of a
washing-up brush with plastic bristles. Do not use abrasives, wire brushes or steel sponges to prevent scratches
and corrosion.
The grill room and the housing must be regularly and thoroughly cleaned with a slightly damp cloth. Do not
spray cleaners in or on the device. Detergent should be applied to the appliance using a cloth. Prevent strong
mechanical loads on the heating during the cleaning process. Attention: residues may ignite, so clean thor-
oughly.
Note: The removable parts are made of high quality stainless steel and are suitable for cleaning in the
washing machine.
Problem
Smoke generation
during operation
The device is not
responding or does
not heat up.
The outside of the
device is very hot.

Cleaning and Care

Troubleshooting

Possible reason
Food is touching the cera-
mic heating element.
The food is smoking wit-
hout touching the heating.
Plug is not plugged in.
Set time has expired.
Device is not switched on.
The micro fuse on the back
of the device is broken.
Device has overheated.
Grill insert not in place.
Blocked vents.
Blocked air intakes.
Solution
Switch off the unit and reposition the food. Caution:
food, accessories and interior are hot.
Interrupt the grilling process immediately and allow
the device to cool. Do not reheat the food.
Insert the plug into the mains socket.
Start the device again.
Push the power button on the back of the device.
Have a specialist company replace the fuse.
If the unit overheats, the heating is switched off
for safety reasons. After a longer cooling phase,
the unit is ready for use again. Do not operate the
appliance without the grill insert. This prevents rapid
overheating.
Turn the unit off and allow to cool completely, then
insert the grill insert.
Remove any items that may be blocking the vents.
Make sure that the air intakes underneath the unit
are free.
28