Storz UP 210 ENDOMAT SELECT Gebrauchsanweisung Seite 64

56
Technische Beschreibung
Brief description (1 line with approx. 40 characters possible)
Possible cause
0x768: Direction change
Electronics error in the speedometer
0x770: Defective electronics (PS)
Error in the monitoring system
0x771: SW error (PS)
Error in the monitoring system
0x772: PS error (PUST)
Error in the monitoring system
0x773: PS error (ST)
Error in the monitoring system
0x774: PS error (H off)
Error in the monitoring system
0x775: PS error (H on)
Error in the monitoring system
0x780: Voltage error
Operating voltage outside of permissible range
0x790: WD task error
BE: Program crash
Technical description
Information messages
Response
Turn the device off and on again, contact KARL STORZ Service if the error reoccurs.
Turn the device off and on again, contact KARL STORZ Service if the error reoccurs.
Turn the device off and on again, contact KARL STORZ Service if the error reoccurs.
Turn the device off and on again, contact KARL STORZ Service if the error reoccurs.
Turn the device off and on again, contact KARL STORZ Service if the error reoccurs.
Turn the device off and on again, contact KARL STORZ Service if the error reoccurs.
Turn the device off and on again, contact KARL STORZ Service if the error reoccurs.
Turn the device off and on again, contact KARL STORZ Service if the error reoccurs.
Turn the device off and on again, contact KARL STORZ Service if the error reoccurs.
Technische beschrijving