Keys And Locks; Ignition Switch/Steering Lock; Helmet Lock - Betamotor ALP4T 125 Bedienungsanleitung

1

KEYS AND LOCKS

The vehicle is supplied with two keys and the related spares for the ignition switch/
steering lock and the helmet lock.
WARNING
Do not keep the spare keys in the vehicle. Keep the keys in a safe and easy-to-reach
place. The code number stamped on the keys should be copied on this manual (or
elsewhere) so it can be used to ask for duplicates should both keys be lost.

IGNITION SWITCH/STEERING LOCK

It controls the ignition circuit and the steering lock, and the opens the saddle.
OFF: Electrical equipment disabled.
ON:
The vehicle can be started.
LOCK: Steering lock on.
To lock the handlebar, turn it to
the left, press the key, rotate it
anticlockwise all the way and
then release it.

HELMET LOCK

Insert the smaller key into the lock located on the left side under the saddle, and then
rotate it anticlockwise to open the helmet hook.
GB
LOCK
92
OFF
ON