Adjusting The Brakes; Adjusting The Clutch - Betamotor ALP4T 125 Bedienungsanleitung

4

ADJUSTING THE BRAKES

Front brake
The front brake is a hydraulically operated
disc brake, and therefore requires no
adjustment.
Rear brake
The rear brake is a hydraulically operated
disc brake.
The brake pedal can be adjusted for height
by means of adjusters B and C.
The brake lever play should never be less
than 5 mm.
B
C

ADJUSTING THE CLUTCH

The only operation that may be required is
the adjustment of the position of clutch le-
ver E.
The adjustment is obtained by means of
adjuster D.
After adjusting the lever with the adjusting
screw, be sure to tighten stop F so as to
lock the screw in the desired position.
Note
F
D
E
The play of the clutch should range from
0.4 to 0.6 mm.
GB
146