Resetting The Trp, Speed Max And Lap Parameters - Betamotor ALP4T 125 Bedienungsanleitung

1

40.3 Resetting the TRP, SPEED max and LAP parameters.

The following parameters can be reset:
- TRP, trip counter, and consequently AVS.
- SPEED max, maximum speed reached by the vehicle.
Times indicated by LAP in both configurations while either of the two pages is displayed.
The parameters can be reset by pressing the MODE button while the vehicle is stationary
or the SCROLL button at all time.
Resetting the TRP and
Press MODE or SCROLL for at least 5 se-
conds, causing 0.0 to be displayed in pla-
ce of the figure.
The TRP parameter can only be reset while
the vehicle is stationary. Resetting TRP also
causes AVS to be reset.
Resetting the LAP parameter
GB
SPEED max parameters
When the LAP time is reset, pages 5 and
6, which are strictly dependent on it, are
also reset.
The figures will be replaced by the hori-
zontal bars, which will remain visible for 1
second.
Releasing the MODE or SCROLL button
while the bars are displayed resets the fi-
gure.
Holding down the MODE or SCROLL but-
ton brings up the next page while retai-
ning the figures on the current page.
108