Replacing The Bulbs Motard - Betamotor ALP 4.0 Bedienungsanleitung

5
REPLACING THE BULBS MOTARD M4
A
B
FRONT
To replace the headlight bulb, disconnect
connectors A from the bulb and then re-
move rubber cap B.
Turn fastening flange C anticlockwise and
remove the bulb from the reflector.
Inserire la lampadina nuova(12V - 55/
C
60W) avendo cura di non toccare il bulbo
per evitare di comprometterne l'efficienza
e ruotare la flangia di fissaggio C in senso
orario fino a battuta.
Note:
In the MOTARD M4 version the rear light
and the indicators require no special main-
tenance as their light is produced by LEDs.
GB
154