Betamotor ALP 4.0 Bedienungsanleitung Seite 98

1
Page 8 - CLK - Clock minutes:seconds
Page 10 - SPEED max
Blanking out pages
If a page is of no interest to the user, it can be blanked out while remaining active to
speed up the display of the next page.
All the pages can be blanked out, individually or in sets, with the exception of default
page 2.
GB
While page 7 is displayed, briefly press
MODE if the vehicle is stationary or SCROLL
while travelling to bring up page 8.
The new page is displayed as soon as the
button is released.
Displayed information:
Clock format
MINUTES:SECONDS 00:00
at the top. The parameter can only be adjust-
ed by pressing MODE or SCROLL while min-
utes or seconds are selected and the vehicle
is stationary.
It also updates page 7, of which it represents
an extension.
Instant speed at the top (max. 199 km/
h or Mph).
While page 8 is displayed, briefly press
MODE if the vehicle is stationary or
SCROLL while travelling to bring up page
9.
The new page is displayed as soon as the
button is released.
Displayed information:
Instant speed at the top (max. 199
km/h or Mph)
SPEED max Maximum speed reached
from the last time the parameter was reset.
It can be reset manually.
To blank out a page:
While the page is displayed, press MODE or
SCROLL and hold it down until WS appears
in the bottom right corner of the LCD display.
When the button is released, the page will no
longer be visible.
To display all blanked out pages again:
While the default page is displayed, press
MODE or SCROLL and hold it down until
WS appears in the bottom right corner of the
LCD display.
If no page had been previously blanked out, all
pages will be blanked out.
To display the pages again, repeat the above
procedure.
98