Replacing The Headlight Bulbs; Replacing The Rear Light Bulb - Betamotor RR 400 Bedienungsanleitung

5
2
A
C
GB
2
3
B

REPLACING THE HEADLIGHT BULBS

Release both spring washers and move
forward the lamp holder front cowl.
Carefully remove the tail light bulb together
with lamp holder 1 from the parabola. Lift
the rubber cover 2, release connector 3
and undo the screw 4. Lift the lamp holder
parabola and replace the light bulb with
1
a new one. Be careful not to touch the
bulb so as not to compromise its efficiency.
To refit, follow the procedure above but in
4
reverse order.
When necessary, in order to replace the
tail light bulb, simply slide it off the lamp
holder and slide in a new one.
Fasten the lamp holder front cowl to the
supporting pins and fix it with the two
elastics.
1

REPLACING THE REAR LIGHT BULB

To replace the brake light bulb, follow these
steps:
•Remove the two fixing screws A and lens
B.
•Replace faulty bulb C.
•Refit lens B and fasten it with the two fix-
ing screws A.
The bulbs have bayonet bases. To remove
them, press them lightly, rotate them 30°
anticlockwise and then extract them.
146