Starting The Engine - Betamotor ALP 4.0 Bedienungsanleitung

2
GB

STARTING THE ENGINE

• Rotate the ignition key clockwise and en-
sure that the neutral warning light (N) on
the instrument panel is lit.
IMPORTANT:
Remember, before turning the key, to posi-
A
tion the light- switch knob in headlight po-
sition (see page 93), so as to reduce bat-
tery consumption as much as possible.
• Set the emergency switch on the throttle
control to the (o) position.
• Turn fuel cock A:
OFF = closed
ON = open
• Pull out starting device knob B, located
on the left side of the carburetor, until the
second click is heard.
Vehicles with electric start only
• Pull the clutch lever while pushing the start
button on the throttle control without rotat-
ing the throttle twist grip.
Vehicles with kick-start (optional)
• Push down the kick-start sharply with the
foot and then fold back the lever
• Wait for about 2 minutes to warm up the
engine without rotating the throttle twist
grip, and then push down starting de-
vice B, pausing after the first click.
114