Sentiotec home.com4 Montage- Und Gebrauchsanweisung Seite 111

Instructions for use for the user
The settings of the following functions are stored in the user programs:
● Temperature
● Humidity
● Additional output
● Light
● Fan
● Coloured light
Preset user programs:
The following user programs are already predefined:
User
program
1
2
3
4
5
* only with active vaporizer
Accessing user program:
1. Use rotary selector 1 to select the user programs icon. Then press
briefly to open the submenu.
► The "User programs" submenu opens and the display shows
the last user program underlined.
2. Press the rotary knob again to use another user program.
► The value is now highlighted in green and can be changed.
► There are five user programs available [1–5]
► Press the rotary selector again to confirm the setting.
3. Move the cursor (underscore) to the right to "Start" and briefly press
the rotary selector.
► The user program is started.
Tempera- Humidity*
ture °C %
90
70
50 60
60 35
0
Light
0 On
0 On
On
On
0 On
p. 47/64
AUX
Off
Off
Off
Off
EN
7