Troubleshooting Guide; Specifications - Cocraft HC1400 Bedienungsanleitung

Troubleshooting guide

The saw does not start.
The saw runs slowly.
Heavy vibrations.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner.
When recycling the product, take it to your local collection facility or
contact the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.

Specifications

Voltage
Power
No-load speed
Max cutting depth at 90° 65 mm
Max cutting depth at 45° 45 mm
Saw blade
Lpa (sound pressure)
Lwa (sound power)
Vibration value
Weight
• Make sure that the mains lead is undamaged and
securely plugged into a wall socket.
• Check that there is power in the wall socket.
• Remember not to use too much force on the blade
when cutting. Let it work at its own pace.
• Is the blade worn? Replace if necessary.
• Check that the blade is in good condition and is
correctly fitted.
220–240 V AC, 50 Hz
1400 W
5800 rpm
185 × 20 × 1.6 mm
89.9 dB(A), Kpa = 3 dB(A)
100.9 dB(A), Kwa = 3 dB(A)
Rear handle a = 1.62 m/s², K = 1.5 m/s²
h,W
Front handle a = 3.32 m/s², K = 1.5 m/s²
h,W
4 kg
13