Herunterladen Inhalt Inhalt Diese Seite drucken

Charge / Discharge Output 1: "Out 1 Data - ROBBE Power Peak E1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
7. Charge / discharge output "OUT 1 DATA"
Working menu for charger output 1. Use the Select buttons / wheel to navigate around the
menu; the Enter button is employed as already described.
Select battery memory 1 - 9
State indicator
-> = charge
<- = discharge
END
READY
and call-up sub-menu
Voltage and tempera-
ture curve
Selected battery
type and cell
count
The charger features nine internal battery
memories [1] ... [9] in which you can store
settings for the charge and discharge para-
meters. The nine battery memories can be
configured in any way you wish.
This provides the user with a swift method of
initiating a charge process simply by calling
up a set of stored charge parameters.
The charge - discharge process is also dis-
played in graphic form: as a miniature graph
in the working display, or optionally as a
large full-screen graphic.
To display the full-screen graphic, use the
cursor to move to the third line, then press
Enter to activate it.
The full-screen display shows the charge
curve, i.e. the battery voltage, the charge
time and the temperature.
Operating instructions
Power Peak E1
Change menu
Display of cur-
rent cycle;
here 1st cycle
of 4
Sub-menu,
Charge / dischar-
ge parameter set-
tings
The voltage difference between any two
(user-selectable) reference points can also
be displayed on-screen.
This is accomplished simply by moving to
the right using the "Select buttons / wheel":
the first dotted line runs out from the Y-axis.
When the dotted line has reached the posi-
tion you want, press "Enter" to confirm, and
the second dotted line appears.
When you have completed your selection,
the voltage difference is displayed at top left
of the screen. Pressing the "ENTER" button
again cancels the line you last activated.
To leave the graphic display you must run
the first line back to the Y-axis using the
"Select buttons / wheel", then press Enter.
Line 4 shows the current cycle.
10
Order No.
8471
Mini-graphic of
voltage and tem-
perature curve

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis