Freeze Mode - G&D DP1.2-Vision-Fiber Installation Und Bedienung

Configuration
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on
Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. Select one of the options given under
24 Bit:  transmits the image data with a maximum colour depth
of 24 bits (default)
 reduces the colour depth of image data to 18 bits
18 Bit:
6. Click on Save

Freeze mode

If the cable connection between the computer module and the user module is inter-
rupted during operation, the KVM extender no longer displays an image at the remote
console.
Enable the Freeze mode if you want the last image that has been displayed at the user
module to be available until the connection is re-established.
To highlight an interrupted connection, the last available image can be displayed
with either a coloured frame and/or a
connection has been interrupted.
41 · G&D DP1.2-Vision-Fiber
KVM extender
.
.
Video channels
.
Configuration
.
.
:
Colour depth
Frozen popup and the time passed since the