(De)Activating Signals - G&D DP-Vision-IP-Fiber-Serie Installation Und Bedienung

How to configure the DSCPs of the IP data packets:
1. Use the remote hotkey Ctrl+
2. Select the row KVM connection
3. Enter the following data under
DiffServ Communication:
DiffServ Data:
4. Press to save your settings.
F2

(De)Activating signals

By default, the KVM switch transfers not only keyboard, video and mouse data but
also audio data between switches.
In addition, you can enable the transmission of RS232 data and, alternatively,
disable the transmission of audio data.
How to (de)activate the transmission of audio or RS232 signals:
1. Use the remote hotkey Ctrl+
2. Select the row
KVM connection
3. Under
Activated signals
to (de)activate and press
4. Press to save your settings.
F2
Establishing a KVM-over-IP™ connection for the first time
Num to open the OSD of the computer module.
and press Enter
Network control
Define the
Differentiated Services Codepoint
used for the classification of the IP packets of the
data packets.
munication
Define the
Differentiated Services Codepoint
used for the classification of the IP packets of the
data packets.
Num to open the OSD of the computer module.
and press
Enter
use the arrow keys to check the box of the signal you want
F8 .
.
:
.
G&D DP-Vision-IP-Fiber · 22
(DSCP) to be
Com-
(DSCP) to be
Data