Installation Instructions; Scope Of Delivery; Accessories For Installation (Optional) - Truma Aventa compact Gebrauchsanweisung Und Einbauanweisung

Installation instructions

Figure 14
Only competent and trained staff (experts) are permitted
to install and repair the Truma product and to carry out the
function test, at the same time observing the installation
and operating instructions and the currently recognised
technical regulations. Experts are persons who, based on
their specialist instruction and training, their knowledge and
experience with Truma products and the relevant standards,
can carry out the necessary work properly and identify
potential hazards.

Scope of delivery

External unit:
– 1 Aventa compact
– 2 brackets
– 4 screws M6 x 70 coated with screw sealant
– 6 screws M6 x 12 coated with screw sealant
– 1 base ring
– 2 roof thickness adapters (each 10 mm)
– 1 remote control with mounting
– 2 screws 2.9 x 16 for mounting
– 2 AAA batteries
– 1 set of operating and installation instructions
– 1 installation template
– 3 Wago clamps
– 1 control panel cable
Air distributor (to be ordered separately):
– 1 air distributor, fully assembled or
– 1 air distributor small, fully assembled

Accessories for installation (optional)

Roof thickness adapter 10 mm, 1 piece (part no. 40091-16900)
Figure 15
Aventa sealing frame (part no. 40091-19500)
Recommended for optimum sealing when retrofitting in
vehicles with 400 x 400 mm cut-out.
Figure 16
Levelling frame installation kit for van
Figure 16 a
PSA adapter frame kit for van
Figure 16 b
Covering tape
cream (part no. 40091-31200)
grey (part no. 40091-31300)
For compensating for a gap of up to 5 mm between air
distributor and roof.
l ~ 2,36 m
Figure 17
Adapter 12 V for lighting the air distributor
not for air distributor small
1 piece (part no. 40091-33000).
Figure 18
EN 23