App Mode In Conjunction With An Inet Box; Changing The Room Temperature - Truma CP plus VarioHeat Gebrauchsanweisung Und Einbauanweisung

APP mode in conjunction with an iNet Box

Operation
In APP mode, the connected appliances and the
Truma CP plus VarioHeat are in stand-by.
– No heating function.
– No hot water heating.
– No operation of the air conditioning system.
– No time switch function in the Truma CP plus VarioHeat
control panel
– The CP plus control panel remains ready to receive com-
mands via the Truma App or the infrared remote control of
the air conditioning system. This means that the connected
appliances remain operable via the Truma App or the infra-
red remote control of the air conditioning system.
Activating APP mode
– Press the rotary push button for about 2 seconds until
"APP" appears in the display.
– Release the rotary push button.
– The previously set values are saved.
Ending APP mode
APP mode is ended
– when new values are determined via the Truma App or the
air conditioning system's infrared remote control.
– when the Truma CP plus VarioHeat control panel is woken
up by pressing the rotary push button. The previously saved
values are then accepted for renewed operation.
26

Changing the room temperature

– Select icon in menu bar (3) with rotary push button.
– Change to the setting level by tapping on the rotary push
button.
– Select between the heater (HEATER) or the air conditioning
system (AC) using the rotary push button, depending on the
connected appliance.
– Tap rotary push button to confirm selection.
– Select desired temperature with rotary push button.
– Tap rotary push button to confirm the value.
a b c
Fig. 8
Quick temperature change possible using rotary push
button (in stand-by screen).
Heater (HEATER)
Settable temperature range 5 – 30 °C (1 °C increments)
a = Heater on – symbol lit, the symbol flashes until the room
temperature is reached.
The temperature range below 5 °C (OFF) must be selected
in order to switch off the heater.
Air conditioning system (AC)
Settable temperature range 16 – 31 °C (1 °C increments)
b = COOL – Air conditioning system is switched on
c = AUTO – Air conditioning system is set to automatic
d = HOT – Air conditioning system is in heating mode.
e = VENT – Air conditioning system is in air circulation mode
d f e
2
3