Truma CP plus VarioHeat Gebrauchsanweisung Und Einbauanweisung Seite 33

6. 12 h / 24 h mode
Display time in 12 h (a. m., p. m.) / 24 h mode.
Fig. 28
Presetting: 24 h mode.
7. Change language
Select the desired language (German, English, French, Italian).
Fig. 29
Presetting: English
8. Showing the version number
Display the version number of the heater, air conditioning
system, Truma iNet Box, and Truma CP plus VarioHeat con-
trol panel.
Example:
H 1.20.01 -> H = Appliance; 1.20.01
= Version number
Fig. 30
Appliance
P = Truma CP plus VarioHeat control panel
L = Truma CP plus VarioHeat control panel CI Bus
A = Air conditioning system
H = Truma VarioHeat
T = Truma iNet Box
E = Truma E-Kit
9. Presetting (RESET)
The Reset function resets the Truma CP plus VarioHeat control
panel to the factory settings. This deletes all settings. Newly
connected appliances are recognised and stored in the con-
trol panel .
– Switch on the power supply
12 V direct voltage for Truma CP plus VarioHeat control panel
and Truma VarioHeat or
230 V mains voltage for air conditioning systems and
Truma E-Kit.
Perform Reset
– Select "RESET" with the rotary push button (8).
– Tap the rotary push button (8).
– "PR SET" appears in the display.
– Tap the rotary push button (8) to confirm.
33