Select Energy Type; Select Fan Level - Truma CP plus VarioHeat Gebrauchsanweisung Und Einbauanweisung

Automatic climate control (AUTO)
Settable temperature range 18 – 25 °C (1 °C increments)
Automatic switchover between heater and air conditioning sys-
tem for an approximately constant temperature on the inside.
f = AUTO – Automatic climate control is activated
Requirements for operation with automatic climate control:
– The heater and air conditioning system must be connected.
– Automatic climate control "ACC" must be activated in the
service menu (see "Service menu" on page 31).

Select energy type

Is displayed only if a Truma VarioHeat and a Truma E-Kit
are both connected.
– Select icon in menu bar (3) with rotary push button.
– Change to the setting level by tapping on the rotary push
button.
– Select the desired energy type with the rotary push button.
– Tap rotary push button to confirm selection.
b
a
Figure 9
c d e
3
Icon Energy
type
a GAS
b MIX 1
c MIX 2
d EL 1
e EL 2

Select fan level

With connected heating / air conditioning system
– Select icon in menu bar (3) with rotary push button.
– Change to the setting level by tapping on the rotary push
button.
– Select desired fan level with rotary push button.
– Tap the rotary push button to confirm the value.
a b
2
Fig. 10
Description
The Truma VarioHeat heats in gas
mode.
The Truma VarioHeat heats in gas
mode. The Truma E-Kit heats with
900 W.
The Truma VarioHeat heats in gas
mode. The Truma E-Kit heats with
max. 1800 W.
The Truma E-Kit heats with 900 W.
The Truma E-Kit heats with max.
1800 W.
c d
3
27