Setting Rear Axle Camber:
For setting the camber, turn the upper transverse link
(A) as for the front axle.
B
Because the upper transverse link has a left and right
hand thread at either end, the transverse link does not
need to be dismantled for the camber to be adjusted
At the damper bridge and in the axle spur, there are
A
several more suspension points (B and C) for the up-
per transverse link. When the wheel rebounds, the
camber changes depending on the installation posi-
C
tion (e.g. stronger camber when the wheel is pushed
in).
45