Specifications - Reely Firestar Bedienungsanleitung



12. Specifications

Motor:
Combustion motor:
Cubic capacity:
Power:
Motor speed:
Bore:
Stroke:
Weight:
Fuel:
Tank capacity:
Lubrication
Air filter:
Power transmission:
Rear-wheel drive:
Chassis: P-240ST
Undercarriage:
Front wheel suspension:
Rear wheel suspension:
Brakes:
Suspension:
Tyres:
Wheel rims:
Body:
Dimensions and weight:
Length:
Width:
Height:
Ground clearance:
Track:
Wheel base:
Weight:
52
FORCE 18SZ, ABC piston and cylinder, slide carburettor, two-chamber resonance exhaust silencer
2.95 ccm
1.68 kW / 2.2 HP at 31,000 rpm
2,000 - 31,000 rpm
16.8 mm
13.6 mm
285 g
Methanol/oil based RC car model fuel, min. 5% - 25% nitromethane and 16% synthetic oil.
75 ccm
Self-lubricating
Dry foam air filter, dismountable
Via the main pinion to the rear axle
Encapsulated differential
Metal pinions and planet wheels
All drive axles are mounted with ball bearings.
Main pinion made of plastic
Bottom support plate and RC mounting plate made of high-strength aluminium alloy
Extremely light, sturdy and torsion-resistant
Two reinforcement tubes
Twin control arm suspension
Straining screw in the upper control arm (camber adjustable)
Front axle leg: Light cast metal
Twin control arm suspension
Straining screw in the upper control arm (camber adjustable)
Disc brake with aluminium brake disc, special brake linings
Spring struts with aluminium oil pressure shock absorbers, spring preload adjustable via knurled nut
Steering points adjustable
Front: Groove profile complete wheels, glued ready for use, width 58 mm, Ø 110 mm
Rear: Block-spike complete wheels, ready to run, width: 58 mm, Ø 110 mm
Disc rims
Polycarbonate, photo-printed
425 mm
335 mm
170 mm
40 - 55 mm
275 mm
275 mm
2,175 g