Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page GB-10
Materials required for assembly
Materials required for assembly
Parts list
(1) Exhaust hood
(2) Exhaust air hose
(3) Check valve
(4) Cable ties
Protective film
The painted surfaces of your new exhaust
hood are covered with blue protective film to
prevent scratching during transport.
• Do not remove the protective film until
shortly before final attachment of the ex-
haust hood.
Tools and aids
You will need:
– Cross-head screwdriver, size 2
– Drill with drill bits suitable for the wall
– Measuring tape / ruler
(1)
– Level
– Pencil
– Stable stepladder
– ø 15 cm air hose for air extraction, or acti-
vated charcoal filter for air recirculation
(2)
– Work gloves
Installation requires some manual dexterity.
Follow the installation steps in the given or-
(3)
der. We also recommend having a second
person with you to help.
Screws
(4)
The screws and wall plugs required to
mount the appliance on a wall are not
included in the package contents, as their
type and dimensions will vary depending on
the characteristics of the wall.
Have a specialist advise you as to which ones
you need.
In total, you will need
– 4 round-headed screws
– 2 washers
– 4 suitable wall plugs
Werbung
Kapitel
Inhaltsverzeichnis
