Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page GB-10
Materials required for assembly
Materials required for assembly
Parts list
(1) Exhaust hood
(2) upper part of the flue screen
(3) lower part of the flue screen
(4) Exhaust air operation: Exhaust air hose
(5) Check valve
(6) Wall bracket for upper flue screen
(7) Retaining plate for lower flue screen
(8) Wall bracket for exhaust hood
(9) 4 plate screws 4.0 × 8 mm
(10) Cable ties
Tools and aids
You will need:
– Screwdriver
– Drill with stone bit, correctly sized for the
screws (11) and (12).
– Measuring tape / ruler
(1)
– Level
– Pencil
– Stable stepladder
– A second person to help
(2)
– Work gloves
(3)
Screws
(4)
The screws and dowels required to
mount the appliance on a wall are not
included in the package contents, as their
(5)
type and dimensions will vary depending on
the characteristics of the wall.
(6)
Please have a specialist advise you as to
(7)
which ones you need.
(8)
(9)
(10)
In total, you will need
– 2 round-head screws (11) to attach
the wall bracket(6) for the upper flue
screen (2)
– 3 countersunk screws (12) to attach the
wall bracket(8) for the exhaust hood (1), ø
6 mm maximum
(11)
(12)
Werbung
Inhaltsverzeichnis
