Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Materials required for assembly
Parts list
(1) Exhaust hood
(2) Glass cover
(3) Flue screen, 2-piece
(4) Exhaust air hose
(5) Mounting rails, 8 pieces
(6) Base plate for ceiling mounting
(7) 4 screws 25 mm, ø 4 mm
(8) 4 washers, conical
(9) 4 rubber fittings
(10) 42 screws 10 mm, ø 4 mm
(11) 26 nuts M4
Materials required for assembly
(12) 26 washers M4
(13) 4 screws 8 mm, ø 4 mm
(14) 1 cable tie
(15) Mounting hook (for securing the raised
flue screen (3) into a mounting rail (5) e.g.
during cleaning/maintenance work)
(1)
2 plastic check valves (without illustrati-
on, necessary for exhaust air operation)
(2)
Materials for mounting to the
ceiling
The screws and wall plugs required to mount
the appliance on a ceiling are not included in
(3)
the package contents, as their type and di-
mensions will vary depending on the charac-
teristics of the ceiling. Please have a specialist
(4)
advise you as to which ones you need.
(5)
You will need:
12 screws and the matching wall plugs or al-
(6)
ternatively 12 heavy-duty anchors.
(7)
(8)
(9)
(10)
Tools and aids
(11)
Prepare the following equipment/tools before
(12)
you start:
(13)
– Cross-head screwdriver, size 2
(14)
– Drill with ø 10 mm drill bits suitable for the
(15)
ceiling
– Measuring tape / ruler
– Level
– Pencil
– Stable stepladder
– ø 15 cm air hose for air extraction, or acti-
vated charcoal filter for air recirculation
Some assembly steps are easier to complete
if a second person helps give you tools and
holds parts.
Page EN-11
Werbung
Kapitel
Inhaltsverzeichnis
