Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-14
Package contents and materials required for assembly
Package contents and materials required for assembly
Parts list
1× Exhaust hood
1× Upper section of the flue screen
1× Lower section of the flue screen
1× Exhaust air hose (for exhaust air oper-
ation)
1× Check valve
1× Wall mount for upper flue screen
1× Retaining plate for lower flue screen
6× Plate screws 4.0 × 8 mm
1× Cable ties
Items not included in the package contents
are
– screws and dowels required to mount the
appliance, as their type and dimensions
will vary depending on the characteristics
of the wall.
Please have a specialist advise you as to
which ones you need (see "Package con-
tents and materials required for assembly"
on page EN-14).
– an activated charcoal filter. This is only re-
quired for recirculation operation.
To order accessories, see "Our Service
Centre" on page EN-22.
Check the delivery
1. Unpack the appliance.
2. Remove all parts of the packaging, plastic
profiles, tape and foam padding.
3. Check that the delivery is complete.
4. Check whether the appliance was dam-
aged during transit.
5. If the delivery is incomplete or the appli-
ance has been damaged during transport,
please contact our Service department
(see page EN-22).
WARNING!
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■ Never use a damaged appliance.
Werbung
Inhaltsverzeichnis
