Materials required for assembly
Parts list
(1) Exhaust hood
(2) Upper section of the flue screen
(3) Lower section of the flue screen
(4) Exhaust air operation: Exhaust air hose
(5) Check valve
(6) Wall mount for upper flue screen
(7) Retaining plate for lower flue screen
(8) 6 plate screws 4.0 × 8 mm
(9) Cable ties
Materials required for assembly
Tools and aids
You will need:
– Screwdriver
– Drill with stone bit, correctly sized for the
screws (10), (11) and (12).
– Measuring tape / ruler
(1)
– Spirit level and pencil
– Stable stepladder
– Work gloves
– another person to help
(2)
Screws
(3)
The screws and dowels required to
mount the appliance on a wall are not
included in the package contents, as
their type and dimensions will vary depending
(4)
on the characteristics of the wall. Please have
a specialist advise you as to which ones you
need.
(5)
(6)
(7)
(8)
(9)
In total, you will need
– 2 round-head screws (10) to attach the
wall mount (6) for the upper flue screen
– 2 round-head screws (11) to mount the
exhaust hood, maximum ø 6 mm
– 2 round-head screws (12) with flat wash-
ers to secure the exhaust hood, maximum
ø 6 mm
– 6 suitable dowels
Page EN-11
(10)
(11)
(12)