Replacing The Activated Charcoal Filter - hanseatic SY-103B3-P1-C81-L22-600 Gebrauchsanleitung

Page GB-18 Care and maintenance
3. Slide the grease filter lock (9) sideways
and carefully remove the grease fil-
ter (10).
Wash the grease filter in a dishwasher or
in the sink like ordinary crockery.
(19)
4. Once the grease filter is completely dry,
insert the grease filter (10) by placing the
pins (18) in the recess (19) on the ex-
haust hood.
5. Slide the lock (9) backwards, hinge the
grease filter (10) upwards to close it, and
release the lock again.
6. Lower the cover (8).
7. Reconnect the power supply.
Replacing the activated
charcoal filter
Activated charcoal filters are required for
circulation air operation. They help combat
odours. They have to be replaced as soon
as the cooking odours can no longer be ade-
quately filtered.
If used frequently, you should change the fil-
ters regularly. Check them at least every 6
(9)
months.
For the source of supply, please see chapter
„Our Service Centre" on page GB-21.
(10)
1. Unplug the mains plug or switch off the
corresponding circuit.
(18)
2. Lift up the exhaust hood cover (8).
(8)
(9)
3. Slide the grease filter lock (9) sideways
and carefully remove the grease fil-
ter (10).
(8)
(10)