Operation; Requirements; Activated Charcoal Filter; Control Elements - hanseatic SY-103B3-P1-C81-L22-600 Gebrauchsanleitung

Page GB-16

Operation

Operation

Requirements

– You have read chapter „For your safety" on
page GB-4 and understand all the safety
notices.
– The exhaust hood has been assembled as
described in chapter „Assembly" on page
GB-11.

Activated charcoal filter

• When using the appliance for air circula-
tion, only do so with activated charcoal
filters inserted.
• If neighbours complain about odours, it
may be a good idea to insert activated
charcoal filters for exhaust air operation,
too.
• For the source of supply, please see
chapter „Our Service Centre" on page
GB-21.
• To insert (see „Replacing the activated
charcoal filter" on page GB-18).

Control elements

(20) (21) (22)
(20) Fan off button
(21) Power button for fan setting 1
(22) Power button for fan setting 2
(23) Power button for fan setting 3
(24) Lighting on/off button

Switching appliance on/off

To switch the appliance
• on, press one of the power
buttons (21) – (23).
• off, press the fan off button (20).

Changing the fan setting

• To change the fan setting, press the but-
ton for the (other) desired setting.

Switching the lighting on

Your exhaust hood is equipped with two LED
lights. The lighting can be switched on or off
independently of the fans.
• To switch the lighting on or off, press the

Tips on saving energy

– Only switch on the fan when needed; oth-
erwise, energy will be wasted.
– Let the fan run as long as cooking fumes
– The fan is not needed when cooking only
(23) (24)
– Ensure that there is enough supply air; oth-
erwise, the exhaust hood may not function
optimally. If necessary, open the window or
kitchen door.
– Clean the grease filters (10) regularly.
Fan settings
(21)
(22)
slow medium
Switching off the appliance does not
switch the lighting off at the same time.
button (24).
or steam are present.
briefly or warming up foods that have lit-
tle or no odour.
(23)
fast