(16)
3. Fit the activated carbon filters (15) to the
right and left of the motor (16) as illus-
trated and tighten them by turning them
anticlockwise, allowing the locks to click
into place.
(19)
4. Insert the grease filter (10) by placing the
pins (18) in the recess (19) on the ex-
haust hood.
5. Slide the lock (9) backwards, hinge the
grease filter (10) upwards to close it, and
release the lock again.
(15)
6. Lower the cover (8).
(9)
(10)
(18)
Page GB-15
Assembly
(8)