Materials required for assembly
Parts list
(1) Exhaust hood
(2) Upper part of the flue screen
(3) Lower part of the flue screen
(4) Exhaust air operation: Exhaust air hose
(5) Exhaust air operation: Check valve
(6) Wall mount for upper flue screen
(7) Retaining plate for lower flue screen
(8) Plate screws 4.0 × 8 mm
(9) Cable ties
Materials required for assembly
Tools and aids
You will need:
– Screwdriver
– Drill with stone bit, correctly sized for the
(10), (11), and (12) screws.
(1)
– Measuring tape / ruler
– Level
– Pencil
– Stable stepladder
– Work gloves
(2)
We also recommend having a second person
with you to help.
(3)
Screws
(4)
The screws and dowels required to
mount the appliance on a wall are not
(5)
included in the package contents, as
their type and dimensions will vary de-
(6)
pending on the characteristics of the
wall.
(7)
Please have a specialist advise you as
to which ones you need.
(8)
(9)
In total, you will need
– 2 round-head screws (10) to attach the wall
mount (6) for the upper flue screen (2)
– 2 round-head screws (11) to hang the ex-
haust hood, maximum ø 4 mm
– 2 round-head screws (12) with flat washers
to secure the exhaust hood (1), maximum
ø 4 mm
– 4 suitable dowels
Page EN-11
(10)
(11)
(12)