Safety Instructions - Conrad 750342 Bedienungsanleitung

Problem Solution
No image Is the polarity of the operation voltage
correct?
Is the TV set / monitor switched on and
ready for operation?
Have you selected the correct AV input on
the TV set / the correct input on the mon-
itor?
Is the power supply correct – DC voltage?
If this is not the case, this may lead to
dysfunction or complete failure of the
camera.
Does the cover hide the lens?
Is the camera connected to the power
supply and the TV set / monitor as
described in the chapter "Connecting the
camera" in this manual?
Any other repair works than the ones
described above may only be performed by
authorised expert personnel.
32
Any use other than the one described above damages
the product. Moreover, this involves dangers, such as
short-circuit, fire, electric shock, etc.
No part of the product may be modified or rebuilt.
Observe the safety instructions and technical data.

Safety instructions

Any claims for guarantee will become
invalid in the event of damage that
results from the non-observance of the
operating manual. We do not accept
responsibility for such damage nor for
any indirect losses.
Nor do we accept responsibility for dam-
age to property or for personal injuries
caused by improper use or non-obser-
vance of safety instructions. Guaranty
claims will not be accepted in any such
case.
The unauthorised conversion and/or modification of the
camera is inadmissible because of safety and approval
reasons (CE).
21