Safety Instructions - Conrad 75 17 85 Bedienungsanleitung

3. Safety Instructions

The warranty will lapse in the event of damage caused by failure to
observe these safety instructions! We do not accept liability for
damage to property and injury to persons caused by mishandling or
non-compliance with the safety instructions!
The exclamation mark indicates important information in these
operating instructions that should always be observed.
• The system components must not be modified or converted, as not only the CE
approval will become void but also the warranty.
• The system components may not be exposed to extreme temperatures, direct
sunlight, intense vibration or heavy mechanical strain.
• If the devices are used in connection with other devices e.g. a TV screen, the
operating instructions and security notices of the connected devices must be
observed absolutely.
• The operation of the surveillance camera system does not replace personal
supervision of children or people who require special assistance, but serves
only as a support to this supervision.
• This camera system uses and generates high frequency energy. If the devices
are not installed and operated in accordance with these instructions, they can
cause signal disturbances. If a wireless camera system leads to interference in
other devices, attempt one or more of the following measures listed below, in
order to restore normal function:
- Change the position of the camera.
- Increase the distance between the affected device and the wireless camera or
the receiver of the wireless camera system.
- Select another transmission channel.
• After rapid changes in temperature, the system components require approx. 15
minutes to stabilise, to adjust to the surrounding temperature, before they can
be used.
• The system components are not toys and should be kept out of the reach of chil-
dren!
• The mains plug-in supplies provided conforms to protection class II. They may
only be connected to a standard household 230V~/50Hz mains supply socket.
23