Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
O P E R A T I N G I N S T R U C T I O N S
Digital radio-controlled
surveillance camera
Item no. 75 42 64
Intended use
The product is used for surveillance of building entrances, entrance gates, etc. The surveillance
camera is operated wireless with internal units 2.4 GHz digital radio DVR monitor set (item no.
754263) or 2.4 GHz digital radio DVR set (item no. 754270), to be ordered separately.
The surveillance camera's power is supplied by the wall plug transformer included in the de-
livery. The camera may also be mounted and operated in outdoor areas (IP66). The wall plug
transformer is designed according to protection class II and may only used in dry, enclosed
indoor areas.
Please bear in mind that it is prohibited by law to observe strangers with this suveil-
lance camera without their knowledge and consent. Observe the rules and regula-
tions of the country where you are using the surveillance camera.
Read these operating instructions completely and thoroughly, as they contain a lot of important
information about installation, operation and handling. Observe all safety instructions! Any use
other than that described above will damage the product and may involve other risks such
as short circuits, fi re and electric shock etc. Do not change or modify any part of the product!
Package Contents
• Radio-controlled surveillance camera
• Wall plug transformer
• Camera support
• Mounting kit
• Camera aerial
• Quick guide
Explanation of Symbols
The lightening symbol in a triangle is used to alert you about potential risks for
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual which absolutely have to be observed.
☞
The „hand" symbol gives you special tips and notes on operation.
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for any consequen-
tial damage!
Nor do we assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! The warranty
will be void in such cases!
• The unauthorised conversion and/or modifi cation of the product is not permitted for
safety and approval reasons (CE).
• The product is not a toy. Children are not aware of the potential dangers involved
when using electrical devices.
• The use of the surveillance camera system does not replace the personal supervi-
sion of children, or people who require special assistance, but only serves as a
support to this supervision.
• The surveillance camera is suitable for installation and operation in outdoor areas
(IP66). The corresponding wall plug transformer is designed according to protec-
tion class II. It may be used only in indoor areas and operated via the mains volt-
age of the public grid.
• Installation and connection may be carried out only in the absence of any voltage.
• Operate the product only via the enclosed wall plug transformer. Do not use any
other power supply.
• The product is only suitable for use in temperate, not tropical, climates.
www.conrad.com
Version 06/12
Getting Started
☞
Connect the suveillance camera and the corresponding internal units (item no. 754263 or item
no. 754270) to the power supply using the wall plug transformers included in the delivery.
Press and hold the power button on the upper edge of the internal unit for about one second
to turn the system on.
The internal units (item no. 754263 or item no. 754270) can be used to operate up to four
wireless surveillance cameras. All surveillance cameras for these systems are preset by the
manufacturer to channel 1. Ensure that each of these devices uses a channel other than the
already installed surveillance camera(s).
Proceed as described in the operating instructions of the internal device (item no. 754263 or
item no. 754270) you are using when connecting ("PAIRING") the surveillance camera to the
internal unit:
In the main menu of the internal unit select the option "CAMERA SETUP" using the arrow keys
and press the MENU button once to enter the submenu.
Use the arrow keys "S" and "F" to select the surveillance camera (1 – 4) that you wish to
confi gure. Use the arrow keys "G " and "D" to select the option "PAIRING".
Once "PAIRING" is selected, press the "MENU" button on the internal unit once to start the pair-
ing process between camera and receiver. Afterwards, press the pairing button. The button is
located on the connecting piece for the wall plug transformer at the end of the camera cable.
The system confi rms the successful connection between surveillance camera and internal unit
by displaying the word "PAIRED" on the monitor. If the connection between the surveillance
camera and internal unit fails, the system shows the message "PAIRING FAIL" on the display.
After successful pairing, press the button "ESC" on the internal unit to exit the menu.
In the menu "CAMERA SETUP" of the internal unit, select the option "ACTIVATE OR
DEACTIVATE" to activate or deactivate the selected surveillance camera. Use the arrow keys
„S" and "F" to select the required surveillance camera and activate it ("ON") or deactivate it
("OFF) by pressing the MENU key. Press "ESC" to leave the menu.
After successfully pairing the surveillance camera and the internal unit and activating the sys-
tem, please check the image provided by the surveillance camera. If required, you can now
optimise the focus of the camera: Do not point the camera directly towards the sun or trees,
bushes and branches that are moving in the wind as this may unintentionally trigger a video
recording via the motion detection system.
• In commercial institutions, the accident prevention regulations of the Employer's
Liability Insurance Associations for Electrical Systems and Operating Materials are
to be observed.
• Handle the product with care, it can be damaged by impacts, blows, or accidental
drops, even from a low height.
• Make sure that the connection cable is not pinched or damaged by sharp edges.
• If the camera is used in combination with other devices (e. g. with the 2.4 GHz
digital radio DVR monitor set), the operating manuals and safety instructions of
these devices must be observed too.
• Disconnect the power supply from the camera, if it is not to be used for a while (e.g.
for storage).
• It can be assumed that safe operation is no longer possible if:
- the device shows visible signs of damage
- the device no longer works
- the device has been stored under adverse conditions.
- it was exposed to heavy loads during transport.
• If you have any questions that are not answered in this manual, please contact our
technical service or another specialist.
Test the surveillance camera before installing it in the desired place.
The camera is designed for radio-controlled operation with the internal unit (DVR/
monitor) of the 2.4 GHz digital radio DVR monitor set (item no. 754263) and 2.4 GHz
digital radio DVR set (item no. 754270). For further information and notes, please
refer to the detailed operating instructions of these products.
Werbung
Inhaltsverzeichnis
