Conrad 750342 Bedienungsanleitung Seite 26

The image of the camera will appear on screen.
Should there be no picture on the screen, howe-
ver, or should there be any other errors, switch
the power and the TV set / monitor off immedia-
tely, and check the settings and connections
once again with the help of the list checklist
"trouble-shooting" (see below).
Vertical and horizontal adaptation of the
image
Hold the camera to the place you have chosen for instal-
lation and check the displayed image. Should it not be
displayed correctly, you can adapt the vertical and hori-
zontal positioning at the camera.
26
Turn the camera cover to open it.
Readjusting the definition
Should, against expectations, the not image be sharply
defined, you can adjust the definition at the lens.
Open the screw at the lens with a
suitable screw-driver.
Turn the lens support until the sur-
veillance area is displayed sharply
on the monitor / TV set.
Make sure the lens is not
obstructed by the housing
cover.
Turn the lens to adjust definition.
27