Gastroback DESIGN MULTI JUICER DIGITAL Bedienungsanleitung Seite 123

Problem Reason
Grinding System: The grinding results
When grinding, the depend on the type
results do not reach and freshness of
the desired consi- your food, the speed
stency. selection, and the
processing time.
Grinding System: The ingredients give
The ingredients go off too much oil or
lumpy during grin- moisture.
ding.
The interior of the
grinding system has
been moist.
It seems to be The blade assembly
impossible to has been screwed
unscrew the blade on too tightly.
assembly from the
For locking the opti-
glass container.
onal accessory to
the motor base, you
grasped the system
by the glass con-
tainer.
Sticky food (e.g.
sugary juice) adhe-
res to the sealing
surfaces.
The sealing sur-
face of the glass
container has been
chipped when screw-
ing on the blade
assembly.
The Solution
In most cases, you need to select another speed. Select a low-
er speed for getting a coarser result (e.g. granulates), select a
high speed level for a finer grind size (powder).
Try to add some sugar or salt to absorb the oils/moisture.
Always completely dry all parts of the grinding system, before
filling in your food. Especially at the blade assembly, residues of
moisture could remain after cleaning.
Get some help for unscrewing: one person holding the glass jug,
the second one clasping the collar of the blade assembly.
DO NOT hold any of the optional accessories by the glass contai-
ner for locking onto the motor base. ALWAYS grasp the collar of
the blade assembly to avoid over-tightening the junction to the
glass container. Get some help for unscrewing.
Soak the glass container in warm dishwater for approx. 1 hour.
Then try again. Get some help for unscrewing.
Get some help for unscrewing. Do not use any chipped or cra-
cked glass parts for preparing food any longer to avoid injuries
due to splinters in your food! Replace the glass jug. Check the
sealing ring for damage, before using the sealing ring again.
123