Gastroback DESIGN MULTI JUICER DIGITAL Bedienungsanleitung Seite 116

Problem
The motor base gets
unexpectedly hot
during operation.
The motor stops
unexpectedly during
operation.
116
Reason The Solution
The power cord is Always unwind the power cord completely before operation to
still wound partly avoid overheating (see: 'Before First Use').
around the cord
storage during ope-
ration.
The motor is already Do not let the appliance operate continuously for more than 20
running continuously minutes. With heavy load, make a break after each 7 minutes
for a too long time. (see: 'Method of Operation and Making Breaks'). If required,
process your food in portions.
Malfunction has Immediately unplug the appliance. Get in contact with an autho-
occurred. rised service centre for examination and repair.
Too much too hard Immediately switch off (selection dial to "OFF", power switch
or fibrous food in to "O") and unplug (see: 'Electronic Overload Protection').
the processing sys- Remove the obstacle (see: 'Emptying the Containers and Remo-
tem is blocking the ving Obstacles' or 'Removing Obstacles from the Glass Jugs').
knives. Thereafter, try again.
The overheat protec- Immediately switch off (selection dial to "OFF", power switch
tion device has been to "O") and unplug. Leave the appliance cool down for at least
triggered. 30 minutes (see: 'Self-Resetting Overheat Protection Device').
Thereafter, try again.
The electronic over- Immediately switch off (selection dial to "OFF", power switch
load protection has to "O") and unplug (see: 'Electronic Overload Protection').
been triggered. Remove the obstacle (see: 'Emptying the Containers and Remo-
ving Obstacles' and 'Removing Obstacles from the Glass Jugs').
Thereafter, try again.
After leaving the Simply turn the selection dial to another speed selection to re-
appliance operate activate the appliance (see: 'Automatic Shut-Off'). However,
for more then 20 you should make a break of at least 20 minutes: switch "OFF"
minutes, the auto- the appliance completely (at the selection dial and power
matic shut-off has switch). Then unplug the appliance and wait for the appliance
been triggered. to cool down.