Gastroback DESIGN MULTI JUICER DIGITAL Bedienungsanleitung Seite 118

Problem
Liquids run over the
rim of the motor
base and/or are
accumulating under
the motor base.
Juice sprays out and
splashes at the juice
spout.
118
Reason The Solution
The juice collector Immediately unplug the appliance. Clean and dry the appliance
or juice spout is (see: 'Cleaning the Juicing System') and leave the motor base
blocked. dry naturally for 1 day.
Always ensure to turn the drip-stop at the juice spout of the
juice collector open before juicing (see: 'Drip-Stop Feature').
Check the juice collector for any obstacles (see: 'Emptying the
Containers and Removing Obstacles').
The pulp container is Immediately unplug the appliance. Clean and dry the appliance
overfilled. (see: 'Cleaning the Juicing System') and leave the motor base
dry naturally for 1 day.
Do not overfill the pulp container or juice jug during processing
(see: 'Emptying the Containers and Removing Obstacles').
The juicing sieve is Immediately unplug the appliance. Clean and dry the appliance
overfilled. (see: 'Cleaning the Juicing System') and leave the motor base
dry naturally for 1 day.
Do not overfill the feed chute. Do apply too much pressure onto
the food pusher during juicing (see: 'Emptying the Containers
and Removing Obstacles' and 'Method of Operation and Making
Breaks').
Some juices are Do not apply too much pressure. If possible, process this type of
very frothy, causing food in combination with other foodstuffs.
splashing at the jui-
ce spout.
The drip-stop is not Ensure to open the drip-stop by turning the stainless steel sleeve
completely open. at the juice spout (see: 'Drip-Stop Feature').