Delivery, Transport, Storage; Safety Information; Delivery; Transport - SystemAir AxZent Betriebsanleitung

5

Delivery, transport, storage

5.1

Safety information

Danger from cutting edges!
»
Wear protective gloves when unpacking.
Hazard of impact if the Multibox falls down!
»
Transport the fan carefully and with appropriate hoisting equipment!
»
Wear a helmet and protective goggles.
Electrical hazard from damaged connection cable or connections!
»
Do not hold the connection cable, terminal box or rotor for transport.
5.2

Delivery

Each device leaves our plant in an electrically and mechanically proper condition. The Multiboxes are delivered on pallets. We recom-
mend transporting them to the installation site in the original packaging.
Checking delivery
Check the Multibox for obvious defects that could impair safe operation.

Pay attention above all to defects on the connection cable, terminal box and rotor, cracks in the housing, as well as missing

rivets, screws or covering caps.
5.3

Transport

Transport and unload the pallet carefully.

Transport the Multibox either in the original packaging or on the provided transport equipment (e.g. lifting eyes) using appropriate

hoisting equipment.
When unpacking the Multibox, only lift it by the base frame.

Bear acceptable human lifting or carrying strength in mind when transporting by hand (see weight on the name plate).

Avoid impacts and distortion of the base plate and other parts of the housing.

5.4

Storage

Store the Multibox in the original packaging in a dry, dust-free location protected against weather.

Avoid the effects of extreme heat or cold.

CAUTION
Hazard due to loss of function of the motor bearing
»
Avoid storing for too much time (recommendation: max. 1 year).
»
Turn the rotor manually every three months, wear safety gloves when doing this.
»
Check that the motor bearing functions properly before installation.
34
Delivery, transport, storage